Welcome to the mining PIRL guide. By following this guide, you will be up and running ter less than 15 minutes.
Pirl is a PoW cryptocurrency based on the Dagger algorithm same spil Ethereum. Because ethash is the driving algo on this fresh coin, it can be mined either by itself or dual mined with other cryptocurrencies such DCR, LBRY, SIA.
Wij will be using Claymore Dual Miner (AMD + NVIDIA) on a Windows Ten (64x) based operating system. If you made it to this guide, chances are you already have set up and configured, Claymore Dual Miner for mining Ethereum, so the switches to your existing setup is one single line ter the initialization verkeersopstopping (usually named Commence.bat).
Part1: Create a Pirl wallet
a) make an online wallet on the official PIRL webstek by going here (https://wallet.pirl.io/)
b) Download the official wallet for your operating system here https://pirl.io/ and clicking on the Download Wallet button.
Whatever you determine, the usual security advice stands. Make sure you recall your password, backup the keystore folder, etc., etc.
Part Two: Downloading and configuring Claymore Dual Miner
The latest Claymore Dual Miner can be found on the official bitcointalk thread on the linksaf section https://bitcointalk.org/index.php?topic=1433925.0
Step 1) The Google listig is usually incapable to provide the files due to too many downloads, but the MEGA verbinding works every time so go ahead and download the miner.
Step Two) Unzip the folder at a location of your choosing
Step Three) Locate and open for editing the begin.bat verkeersopstopping
Step Four) Substitute the contents of the verkeersopstopping with the following line
EthDcrMiner64.exe -epool stratum+tcp://pirl.minerpool.nipt:8002 -ewal YOURADDRESSHERE -epsw x -allpools 1 -allcoins exp -gser Two -eworker Myrigname
Make sure you substitute YOURADDRESSHERE with the actual address you generated from your wallet te STEP 1 of the guide.
Save the verkeersopstopping and proceed
Part Trio: Commence mining Pirl
Double-click on the Batch opstopping you just edited, “begin.bat” and the miner should speelpop up and commence mining PIRL after DAG creation.
At the time of writing this guide the difficulty of mining Pirl is very low and the epoch about #13 or so, so your typical RX480 4GB will be crunching at 30MHS (with the suitable BIOS improvements). So, with a equipment of 100MHS te Ethash, you will be making Legal.708666 Pirl/Day or $7.89, at the current price of 0.48$.